Contact Us
TEL: +86-532-82515902
Address: Huaqiao Country, Jimo, Qingdao, China
Home > Knowledge > Content
Influencing factors of solid Wood Furniture
Oct 10, 2018

Several factors affecting wooden Furniture

1. Natural beauty

Because there are no two exactly the same trees, two identical pieces of material, each product has its unique characteristics, the natural properties of wood, such as mineral lines, color and texture changes, pin knots, resin bags, and other natural imprints. Both make furniture more natural aesthetic.

2. Temperature effect

The moisture content of the wood that has just been sawn is more than 50. In order to process such wood into furniture, the wood needs to be carefully dried to reduce its moisture content to a certain extent, to ensure that the final product adapts to the relative temperature of most households.

However, as the temperature of the home changes, wooden furniture will continue to exchange moisture with the air, just like your skin, wood is porous, and dry air will shrink because of the moisture emission. Similarly, when the relative temperature rises, the wood absorbs enough moisture to expand slightly, but these slight natural changes do not affect the stability and durability of the furniture.

3, effect of temperature difference

The temperature is 18 degrees Celsius to 24 degrees, relative temperature is 35- 40, it is the most ideal environment for wood furniture, please avoid the furniture close to the heat source or air conditioner tuyere, the temperature change can cause any furniture exposed part of damage, at the same time, The use of humidifiers, fireplaces or small heaters may also cause premature aging of furniture.

4, expansion effect

In wet conditions, the front of solid wood drawers can become difficult to open and close due to expansion. A simple solution is to apply wax or paraffin on the drawer edges and bottom slides. If the humidity continues to be high for a long time, consider using dehumidifier, when the air becomes dry, the drawer can open and close naturally.

5. Light effect

Solid wood furniture customization do not allow the furniture to be exposed to direct sunlight for a long time, continuous exposure, ultraviolet rays in the coating surface will produce fine cracks or cause fading, blackening. We recommend moving furniture out of the sunlight and, if necessary, through curtains to block the light. However, some wood species naturally become deeper over time. These changes are not product quality defects, but normal phenomena.

Previous: The casters of the wooden baby cot

Next: Six standards of ergonomic children's chair